Zigbee HomeKit Temperature and Humidity Sensor NEO NAS-TH07BH
Keep everything under control. The NEO NAS-TH07BH sensor will allow you to better take care of the conditions in your home. It measures temperature and air humidity – measurement results can be found in the application. The device is compatible with Tuya and Apple Home ecosystems, and also works with voice assistants Google Assistant and Amazon Alexa. It is also very easy to configure and can be powered in two ways – via micro USB or with AA batteries.
Precise measurements, convenient access to information
Keep your finger on the pulse and enjoy convenient access to information about the conditions in your home. The NEO sensor can precisely measure temperature (from -10°C to 50°C) and air humidity (from 1% to 95%), and measurement results are available in the application. So, you can check anytime if everything is okay, and if necessary, turn on the heater or humidifier.
Convenient control
After connecting the sensor to a HomeKit or Zigbee gateway (sold separately), you will gain the ability to pair it with other devices and create smart scenes. Thanks to this, you can for example make the air conditioner turn on automatically when the temperature exceeds a certain value, and if the humidity drops below a set level, the air humidifier will start working. The possibilities are really vast! The product is also compatible with Amazon Alexa and Google Home assistants, allowing you to control it with your voice. Now, just a few words are enough to find out, for example, what temperature prevails in a selected room!
Simple installation, quick configuration
Installing the sensor will not cause you any problems – you can attach it to the wall or simply place it on a table or shelf. Its configuration is also very simple and quick – just use the application and follow a few simple steps. You won't lose too much valuable time on it!
2 power supply options
The socket can be powered in 2 ways. It has been equipped with a micro USB port, which allows you to connect it to a standard charger or power bank. There is also the option of powering it with AA batteries. This way, you can prepare for various circumstances and be sure that the device will work even during power outages. You can conveniently check the battery status in the application and receive notifications about low charge levels.
| Manufacturer | NEO |
|---|
| Model | NAS-TH07BH |
|---|
| Power supply | Micro USB 5 V / 1 A or 1x AA battery 1.5 V |
|---|
| Current consumption in standby mode | 45 uA |
|---|
| Temperature measurement accuracy | 0.3°C |
|---|
| Air humidity measurement accuracy | 6% RH |
|---|
| Temperature and humidity detection interval | 300 s |
|---|
| Temperature detection range | From -10°C to 60°C |
|---|
| Humidity detection range | From 1%RH to 95%RH (no condensation) |
|---|
| Communication standard | Zigbee IEEE 802.15.4 |
|---|
| Range | Up to 45 m |
|---|
| Dimensions | 82 x 27 x 23 mm |
|---|
| Compatibility | Tuya, Apple HomeKit, Google Assistant, Amazon Alexa |
|---|
